Top 10 Best Boost Pedals Under $100 (July 2020)
If you don’t have that many pedals on your board and you’re looking for a little extra pop. Without changing the tone you’ve built up and come to love. A boost pedal under $100 with it’s own tone controls might be the way to go. If you have a multi-band equalizer in your setup already, you might just want a simple boost pedal under $100 that doesn’t give you too much in terms of control. You’ll take care of the tone elsewhere.
What Is A Boost Pedal?
In the interest of those who don’t know much about boost pedals. Boost pedals simply boost your sound (you don’t say). They increase the amount of signal going into your amplifier & push the initial gain stage much harder. The key to a boost pedal under $100 is that it can do all of this without distorting or muddying your overall tone.
Why Do I Need One Of The Best Boost Pedals Under $100?
A transparent boost guitar pedal or clean boost pedal can be a really useful sound for a guitarist to have on their pedalboard. Being able to control the amount of boost, bass and treble without subjecting your signal to overdrive. Boost pedals can increase the volume of a tube amp a little bit or a lot. It all depends on how you use your boost pedal.
The great thing about having a boost guitar pedal on your board is that it can enhance the limited sound of cheaper amps and guitars. If you have a low output setup don’t worry, you can make use of a booster pedals party trick and step your whole rig up. Even if it’s just to stand out for that guitar solo. It’s not the perfect solution but it sure beats splashing the cash on a whole new setup if you’re budget won’t allow for it.
Boost pedals under $100 can help push the front end of your amplifier, add grit and more volume without distorting your signal. These pedals are really useful for low output pickups.
What Do The Best Boost Pedals Under $100 Do?
Boost pedals are designed with a simple purpose, that’s why many of them are extraordinarily simplistic. A single volume knob and pedal button to activate and deactivate the boost pedal. It’s worth noting however that although many may look the same, they are not all created equally. As with most pedals on the market one or two will be substantially better than the rest.
Clean boost pedals under $100 add more volume, perfect for solos and rhythm. This helps your sound push though the rest of the band’s output at the times when all eyes should be on you. Boost pedals give your more headroom, flexibility & clarity. They’re often used to accentuate the top-end frequencies of your tone.
Can The Best Boost Pedals Under $100 Effect Your Tone?
A boost pedal under $100 can result in your tone being changed. The best boost pedals will change it less than others. This combined with the placement of the boost pedal within your pedalboard and the amplifier you’re using all contribute to how much or how little your tone is effected.
Boost pedals react differently to different amps. Knowing how your amp reacts to your amp or selection of amplifiers is important. Playing around with different combinations is advised.
Some of the most honest boost pedal manufacturers concede that their pedal effects tone. To help they come with built in tonal controls. These controls range from simple knobs to a complicated multi band equalizer.
Enjoy Our List Of Best Boost Pedals Under $100
It’s very easy to get overwhelmed while looking for the best boost pedals under $100 on the market. Deciding which is the right one for your is even more difficult. We’ve put this list together to help you decide which boost pedal under $100 is for you.
Jim Dunlop MC401 MXR Boost/ Line Driver Pedal
- ✔ Joint Project Between MXR & Custom Audio Electronics Founder Bob Bradshaw
- ✔ High Quality Components Used
- ✔ True Bypass Switching
- ✔ Features Unique Sonic Stamp Of legendary Designer Bob Bradshaw
- Input Impedance: 1 kΩ
- Output Impedance: 150 Ω
- Nominal Input: -22 dBV
- Output Level: -22 dBV
- Boost Gain Range: 20 dB
- Noise Floor: >95 dB
- Bypass: True Hardwire
- Current Draw: 1.5 mA
- Power Supply: 9 volts DC
- Dimensions: 5.8″ x 4.8″ x 3″
The MC401 Boost/Line Driver from MXR is a potent volume pusher, taking your guitar’s signal up by a significant notch. MC401 is a simple booster and line driver that will find its place on your pedalboard.
The MC401 is simple in design but superbly effective in solving a variety of mismatched line level and signal conditioning problems that can occur when combining effects. The MC401’s circuit design has been used for years by CAE in the world’s best guitarist’s rigs to remedy these problems and rejuvenate the sparkle, punch and brilliance that can be lost. It can also be used as an ultra-clean boost (up to +20dB) for solos or to drive effects for more dynamics and sensitivity.
MC401 Boost/Line Driver is one of the best boost pedals out there without any exaggeration. Though it is not the most versatile thing in the world, it excels at the job it has and we cannot ask anything else from it. Another highly recommended boost pedal, you should really consider adding this to your pedalboard.
TC Electronic Spark Booster Pedal
- ✔ True Bypass Switching
- ✔ A Whopping 26 dB Of Boost
- ✔ Sturdy Die-Cast Metal Case
- ✔ Designed & Engineered In Denmark
- 26 dB of boost.
- Level knob – drive amps even harder.
- Place after existing distortion/overdrive to enhance drive sounds.
- Add grit, life and compression to your tone.
- Add body, punch and warmth to pickups.
- Mid-boost – cut through any mix.
- Active EQ – extended low and high end.
- True bypass – optimal signal integrity.
What starts as a “just-wanna-try-this-pedal-out”-session turns out to be a 3 hour marathon of new riffs, licks and ideas, without you even noticing any time has passed – because you were too busy having fun and sounding great. That type of pedal.
Spark Booster works wonders as an always on-type of effect – adding life, grit and compression to your sound in a way that just oozes tone and musicality. Add body, punch and warmth to pickups, drive amps to peak performance and enhance the sonic possibilities of existing sounds. Spark Booster also shines when used as a pure level boost. It’s the perfect tool to prime solos, highlight parts and add another musical dimension to your amp or Overdrive/Distortion pedal – to really drive that killer solo, lick or riff home.
Spark Booster’s feature set is all about you – maximizing what you already have and realizing your potential. The level knob allows you to add 26 dB of boost – it raises your volume without altering the character of your tone in any way. Spark Booster’s Gain knob is perfect for adding a hint of breakup or slight compression to a clean amp.
The active EQ controls consist of Bass and Treble knobs – which allow you to cut and boost these frequencies. They form the perfect tone shaping tool and because they are active EQs, Spark Booster can amplify frequency areas as well, and be used to create deep, extended lows or to add beautiful top-end sparkle. Also, Spark Booster is True-bypass, guaranteeing optimal tonal integrity.
Rounding out the feature set of Spark Booster is a little toggle switch that allows for three settings. The ‘Clean’ setting means the pedal boosts your signal equally across the frequency spectrum. The ‘Fat’ setting fattens up sounds and adds life and punch to your sound, and allows for precise tonal shaping with the EQ and Gain knobs. The Mid-boost section provides a bump in the mids that is both musical and pronounced. It cuts through any mix with heaps of unprecedented clarity and allows you to be heard like never before.
Drive, driven full circle.
Spark Booster is the fourth entry for Overdrive/Distortion pedals in our compact pedal series, and rounds up our lineup on these type of pedal platform. Based on the runaway success of the classic-sounding Dark Matter Distortion, the more modern voiced Röttweiler Distortion and the MojoMojo Overdrive, Spark Booster had to be the grand finale to our take on drive, distortion and boost. Simply put, we wanted to make this one truly special and in order to do so, we took inspiration from our own history.
Rooted in tradition – aimed at rebellion.
Whether you are a starting guitarist or a seasoned pro, chances are you’ve heard of us at some point. For many this will be about our reputation in Reverbs, Delay and Modulation effects, but for guitarists who know and love their boost- and distortion greats, it will be about one of our first pedals: the TC Electronic Booster + Line Driver & Distortion. A true classic in its own right and the perfect starting point for Spark Booster. To this day, the Booster + Line Driver & Distortion is used by high-profile pros as diverse as Scott Ian (Anthrax) and Allan Holdsworth, and it is a highly sought after pedal on the used market. We took all that made the Booster + Line Driver & Distortion so immensely popular and brought it into the 21st century. And so, Spark Booster is not a 1:1 port, nor is it a reissue or a tribute. Rather than that, Spark Booster represents a modern take on all that made the TC Electronic Booster + Line Driver & Distortion such a fantastic pedal – and the ultimate declaration of our love for amazing boost and distortion sounds, aimed squarely at guitarists that want to spark their creativity.
MXR M293 Booster Pedal
- ✔ Boost Volume By Up To 25dB
- ✔ Features Volume & Tone Control Knobs
- ✔ Durable Metal Housing
- ✔ Small Sized Pedal Will Fit On Most Pedalboards
- Up to 25 dB of boost
- Sound of the Echoplex preamp in a mini case
- True bypass
- Controls for volume and tone
- Internal Trimpoti to adjust the output of the Echoplex preamp
- Bypass footswitch
- Status LED
- Metal housing
- 6.3 mm Mono jack input/ output
- Power supply via supplied 9V DC (Dunlop ECB 003) power supply
- Current consumption: 12.5mA
- Dimensions (L x W x H): 90 x 40 x 55 mm
- Weight: 130 g
The MXR Booster Mini gives you the sonic secret sauce of the Echoplex Preamp with the legendary boosting power of the MXR Micro Amp in a lightweight, space-saving mini housing. The Volume control has up to +25dB on tap while the Tone control rolls off highs. To add a little extra grit to your signal, adjust the internal Echoplex Preamp level control. Put the MXR Booster Mini on your board to save space, season up your tone, and fly high above the mix.
The MXR Booster Mini is actually two pedals in one, combining the sought-after boost found in the MXR Micro Amp and the subtle gritty edge from the Echoplex Preamp. The Booster Mini comes in a lightweight mini-housing and features controls for volume and tone. Using it as a boost in front of an amp, the pedal responds with warm sustain and ballsy overdrive.
Overall we think this clean boost pedal has more too it than most. If you think this is the pedal for you, go check it out!
EarthQuaker Devices Arrows V2 Boost Pedal
- ✔ Boosts Midrange, Tightens Up Low End & Makes Top End Shine
- ✔ No Nonsense Single Level Knob
- ✔ True Bypass Switching
- ✔ Made In Akron, Ohio, USA
- Features a new enclosure, all-discrete analog ciruitry, top-mounted jacks, and silent relay-based switching
- Designed for adding an additional channel of gain to your dirt pedals and brightening up neck pickups
- Boosts midrange, tightens up low ends and makes top ends shine while driving your dirt into blooming sustain with excellent harmonics
- Simple interface is no nonsense; a single control that will either boost or cut your signal
- Remove the muck from bass heavy fuzz pedals, push light overdrives into higher gains than you thought possible
- An all analog, true bypass pedal that really makes your signal pop, even on its own
- Made with care by human hands in Akron, Ohio
- Measures; 4.40″ x 2.80″ x 1.95″ with knob
- Current Draw; 8mA
- Input Impedance; 10M Ohm
- Output Impedance; <1K Ohm
- Power; Standard 9V DC Power Supply w/ 2.1mm Negative Center Barrel
The Arrows pedal is a simple all-analogue preamp booster pedal that’s been designed to work with other dirt pedals to give them another channel of dirt. It is designed with the intention of adding an additional channel of gain to your dirt pedals as well as brightening up neck pickups. It boosts midrange, tightens up the low end and makes the top end shine while adding some push to drive your dirt into blooming sustain with excellent harmonics. Use the Arrows to remove the muck from bass heavy fuzz pedals, push light overdrives into higher gains than you thought possible or even on its own to make your signal really pop with more pizazz.
As an all-discrete tone sculpting preamp booster, the Arrows’ simple interface is no nonsense; a single Level control that will either boost or cut your signal. While the new V2 enclosure, with its top-mounted jacks, make fitting the pedal even into the most crowded pedal board a breeze.
A beautifully designed boost pedal that looks stunning and features an all analog circuit. We highly recommend you consider it as your preamp booster pedal of choice.
Nobels ODR-Mini Natural Overdrive Pedal
- ✔ Slimline Overdrive Pedal
- ✔ Glow In The Dark Knobs
- ✔ Features Drive, Level & Spectrum Control Knobs
- ✔ Double As A Boost Pedal
- The same “Natural Overdrive” DNA as the Nobels ODR-1, but with a slightly firmer sound
- Lightweight and compact
- True bypass
- “Glow in the dark” buttons
- Controls: Drive, Level, Spectrum
- LED: Effect On
- Foot switch: Effect bypass
- Connectors: Input (6.3 mm jack)
- Output (6.3 mm jack)
- Mains adapter connection (hollow plug socket 5.5 x 2.1 mm, negative pole inside)
- Power supply with a 9-18 V DC power adapter
- Dimensions (W x D x H): 41 x 92 x 47 mm
At first glance, the control layout looks pretty standard, with Volume, Drive and Spectrum (Tone), but the way Spectrum affects the tone is a little different from the norm. The drive range of this pedal is impressively wide, going from virtually clean to a classic rock‑style overdrive. Using the Spectrum control in the second half of its clockwise travel delivers the most overdrive, as the EQ boost comes pre the drive circuit.
While I have to say that this isn’t one of those pedals that wows you when you first plug-in, after using it for a while its versatility really does start to shine through. If you like your drive on the more subtle side, this is definitely one to check out.
MXR M133 Micro Amp Pedal
- ✔ Adds Gain Based On Single Input Dial
- ✔ Perfect For Boosting Lead Guitar
- ✔ Solid, Durable Metal Housing
- ✔ Hardware Bypass
- Adjustable boost
- Perfect for switching between guitars with unmatched output
- Great for use with long signal chains, or anytime signal drop-off is a problem
- Knob for gain, status LED
- Hardwire bypass
- Sturdy metal housing
- Operation via optional 9V battery or optional 9V power supply unit
- Made in USA
A booster pedal to give you a little more oomph needed to overdrive your amp, or boost your tone for a solo. Adding a preset amount of gain with just a single control, the Micro Amp is a great way to boost your signal for lead work or adjust between two different guitars with unmatched output (i.e. humbuckers to single-coils). It can also provide a permanent boost in a long effects chain where signal drop off is a problem.
If you use several pedals, this handy unit lets you bring your signal back up to the level you need before it goes to the amp. Give your rig a boost, get your hands on the MXR M133 Micro Amp booster today!
NUX Drive Core Deluxe Overdrive Pedal
- ✔ True Bypass
- ✔ Up To 10dB Of Clean Boost
- ✔ Boost, Mix & Drive Toggle Switch
- ✔ Features Clean Boost, Drive, Tone & Level Control Knobs
- Classic Texas overdrive tone for Rock and Blues
- Clean boost + overdrive
- Bass boost
- True Bypass
- Besides theIt has a fat overdrive tone and a clean boost that adds just a little brightness.
- USB for firmware update
- Power: 9V (9V battery) AC adaptor (negative tip)
- Dimensions 122(L) x 72(W) x 47(H)mm
- Weight 270g
- Nominal Input Level: -20dBu (GUITAR) +3dBu (MAX)
Blues to the Core Drive Core Deluxe is the best fully functioned drive pedal which you can boost your clean tone without any crack sounds in clean mode or if you want to use fat blues sound you can add extra bass to drive mode for warmer sounds.
Mix mode allows you to add some drive attacks while you play clean and you can make good combinations with overdrive and clean. There are 3 different modes improved with analog circuits that allows making some good analog sound combinations.
Mooer Micro Buffer Pedal
- ✔ Low Cut Frequency: 140Hz
- ✔ High Cut Frequency: 4. 5kHz
- ✔ True Bypass
- ✔ Mini Sized Pedal - Fit On Crowded Pedalboards
- Increases the signal quality with longer cable paths
- Up to 6 dB boost
- Toggle switch for high-cut and low-cut
- True Bypass
- Metal casing
- Dimensions (W x D x H): 93.5 x 42 x 52 mm
- Weight: 145 g
The Mooer Micro Buffer delivers accurate copy of the input signal frequency and removal of unconventional signal frequency, which perfectly output the original signal to the next pedal, thus obtaining the original musical sound.
The Micro Buffer is equipped with a high-cut & low-cut switch and a boost knob, making the Micro Buffer features richer and easier to use.
Overall, the Mooer Micro Buffer is a very good quality product with adjustable parameters. For the price, it’s incredible value and it’s difficult to justify the huge price hike of other buffer pedals out there. With it’s built in booster and EQ features it’s a winner in our eyes.
NUX Horseman Overdrive Pedal
- ✔ Gold & Silver Modes - Two Independent Pedal Sounds
- ✔ Features Gain, Treble & Output Control Knobs
- ✔ Pedal Has True Bypass & Buffer Bypass Features
- ✔ Drop The Gain To Use The Horseman As A Clean Boost Pedal
- Power requirement: 9V negative tip
- Gold and Silver modes: 2 independent pedal sound in one mini stomp box
- Controls: Gain, Treble and Output
- Voltage Converter
- True bypass / buffer bypass
NUX Horseman pays homage to the legendary Centaur pedal. There are 3 dials for primary settings and 2 modes: Gold and Silver, and it offers massive headway usually requiring an 18v input. Gold Mode mimics its classic predecessor; the transparent Gold Centaur overdrive pedal and the Silver Mode is a powered-up version with an extended gain range (Silver Centaur).
The sound is based on the Centaur’s voltage converter circuit. But the Horseman’s characteristic design is crafted with a built-in OP-AMP voltage-converter driving the 18V to OP-AMP. Higher voltage-supply orders-up more harmonics, and convincingly reproduces the sound of this unique pedal.
Clean Boost Another “classic” way to use the NUX Horseman. Very useful when used in combination with the amplifiers drive channel (or any other drive pedal). And, depending on the Gain – Output adjustment, it lets the Horseman be used as a clean boost. Dial-up a low-gain with a high output setting, and it adds mostly volume and minimal color to your sound.
Additionally, the controls can be set to distort the sound signal in the pedal, where two Schottky diodes can perform a waveform clipping. ( The germanium diodes are discontinued, we especially select the Schottky diodes to replicate the waveform clipping ) The “gain” knob is a double potentiometer (a “dual-ganged gain pot”), which controls bass and middle frequencies. Treble and volume are each controlled with separate knobs.
NUX Horseman has an optional bypass mode. You can use the pedal in True Bypass mode to keep your signal untouched when the pedal is OFF in the chain. We highly recommend to select buffer bypass mode if you have more than 4 pedals connected together; switch to Buffer Bypass mode and there will be no signal loss in your pedal chain!
A pedal full of character. Recommended for those looking for a small sized pedal with a history to it’s design and creation. The True/Buffer bypass is a great extra and will allow you to use this is many different areas of your pedalboard.
Tone City Flexo Drive Overdrive & Boost Pedal
- ✔ Overdrive/Boost Pedal
- ✔ Tone, Volume, Drive & Boost Control Knobs
- ✔ Overdrive Mode Select & OD/Boost Direction Select Toggle Switches
- ✔ Durable Metal Chassis
- Type: Overdrive/Boost
- Control Knobs: Tone, Volume, Drive, Overdrive Mode Select, OD/Boost Direction Select, Boost
- Inputs: 1 x 1/4″
- Outputs: 1 x 1/4″
- Power Supply: 9V DC Power Supply Required (Not Included)
- Dimensions: 92 x 120 x 55 mm
- Independent overdrive and boost circuit
- Changeable direction for overdrive and boost
- Three drive mode for overdrive
- High-quality components, true bypass circuit
The Tone City Flexo Drive is an Overdrive/Boost pedal with independent circuits, changeable direction for overdrive and boost, and three drive modes for overdrive. The Flexo Drive uses high quality components and is true bypass. The Tone City Flexo is a dual button overdrive and boost pedal with some sweet stacking options that make this a super versatile overdrive. And for the price, it’s got to be near the top of the list in terms of pure value.
The Flexo drive is useable as either an independent boost or independent ovedrive with a separate footswitch for each but the real bonus is that you can stack the drive and boost however you like. The drive can switched between two modes including vintage-open-wide and simply OD mode which is a slightly hotter gain mode. So depending on the style of drive you’re going for and how much saturation you want from the boost, you can simply switch sounds using the mini-toggle.
It’s also got a tone control to control the EQ response going from a dark drive to super bright and a volume control to match input level. The boost control is simple – it’s controlled by a single knob that’ll boost your volume. It’s a clean boost but will obviously affect how the pedal reacts when stacked with the gain control.
Overall, the Tone City Flexo is a dual button overdrive and boost pedal with some sweet stacking options that make this a super versatile overdrive. Lots of different tones are achievable and the boost works really well on its own. Simply put it’s 2 pedals for the price of one. It’s lightweight yet built like a tank so we’re not too worried about durability.
If you have the room for a double pedal on your board, you’re in the market for a capable overdrive or a sufficient boost pedal, then this pedal might be for you.
Best Boost Pedals On The MarketIf you don't have that many pedals on your board and you're looking for a little extra pop. Without changing the tone you've built up and com...
Best Mini Boost Pedals On The MarketIf you don't have that many pedals on your board and you're looking for a little extra pop. Without changing the tone you've built up and com...
Best Treble Boost Pedals On The MarketIf you don't have that many pedals on your board and you're looking for a little extra pop. Without changing the tone you've built up and com...
- Jim Dunlop MC401 MXR Boost/ Line Driver Pedal
- TC Electronic Spark Booster Pedal
- MXR M293 Booster Pedal
- EarthQuaker Devices Arrows V2 Boost Pedal
- Nobels ODR-Mini Natural Overdrive Pedal
- MXR M133 Micro Amp Pedal
- Nux Drive Core Deluxe Overdrive Pedal
- Mooer Micro Buffer Pedal
- NUX Horseman Overdrive Pedal
- Tone City Flexo Drive Overdrive & Boost Pedal